Selected Publications
1 Li H G, Yang W P, Wen B C. Self-excited vibration in rolling mill with clearance and symmetric restoring force via asymptotic method and numerical method [A]. Wen B C. The Proceedings of the International Conference on Vibration Engineering [C]. Shenyang: Northeastern University Press, 1998. 292~295.
2 Yang W P, Li H G, Shi B Q, Guo Y S, Ren L Y. Analysis of vibration signals for large-power automobile engine based on wavelet packets theory [A]. Wen B C. The Proceedings of the International Conference on Vibration Engineering [C]. Shenyang: Northeastern University Press, 1998. 750-752.
3 Yuan H Q, Li H G, Wen B C. Study on stability and bifurcation behaviour of the rotor with local rubbing [A]. Starr A G, Leung A Y T, Wright J R, Sandoz D J. Integrating Dynamics, Condition Monitoring and Control for the 21st Century, Proceedings of the International Conference on the Integration of Dynamics, Monitoring and Control [C]. Manchester, 1999. 305-308. ( ISTP )
4 Yuan H Q, Wen B C, Li H G. Study on bifurcation and chaos behavior of the rotor with local rubbing [A]. Proceedings of APVC'99 [C]. Singapore, 1999. 898-902.
5 Li H G, Yang W P, Wen B C. Asymptotic method and numerical analysis for self-excited vibration in rolling mill with clearance [J]. Shock and Vibration, 2001, 8(1): 9-14. (SCI)
6 Li H G, Zhang J W, Wen B C. Chaotic behaviors of a bilinear hysteretic oscillator with clearance [A]. Wen B C. Proceedings of the Asia-Pacific Vibration Conference [C]. Changchun: Jilin Science and Technology Press, 2001. 105~109. (ISTP)
7 Liu Y Q, Zhang J W, Li H G. Hysteresis response for twin-tube hydraulic shock absorber [A]. Wen B C. Proceedings of the Asia-Pacific Vibration Conference [C]. Changchun: Jilin Science and Technology Press, 2001. 445~450.
8 Zheng L, Li Y N, Li H G, Wen B C. Bifurcation and chaotic motion of a piecewise linear vibration system in gear-pairs [A]. Wen B C. Proceedings of the Asia-Pacific Vibration Conference [C]. Changchun: Jilin Science and Technology Press, 2001. 491~495.
9 Li H G, Zhang J W, Wen B C. Chaotic behaviors of a bilinear hysteretic oscillator [J]. Mechanics Research Communications, 2002, 29(5): 283-289. (SCI)
10 Liu Y Q, Zhang J W, Li H G. Test and simulation of nonlinear dynamic response for double-tube hydraulic shock absorber [J]. SAE Technical Paper Series 2002-01-0320, SP-1654.
11 Zhang W M, Meng G, Li H G. Adaptive vibration control of micro-cantilever beam in MEMS [A]. IECON Proceedings (Industrial Electronics Conference), v 3, IECON 2004 - 30th Annual Conference of IEEE Industrial Eelctronics Society, 2004, p 2430-2435
12 Zhang W M, Meng G, Li H G. Electrostatic micromotor and its reliability [J]. Microelectronics Reliability, 2005, 45(7-8):1230-1242(SCI)
13 Dong X J, Meng G, Li H G, Ye L. Vibration analysis of a stepped laminated composite Timoshenko beam [J]. Mechanics Research Communications, 2005, 32(5): 572-581(SCI)
14 Zhang WM, Meng G. Li HG, Modeling and simulation of the squeeze film effect on the MEMS structures [A], Hong W et al: 2005 Asia-Pacific Microwave Conference Proceedings, Vols 1-5 [C], Asia-Pacific Microwave Conference, DEC 04-07, 2005, Suzhou, China, IEEE, 1332-1334 (ISTP)
15 Li H G, Meng G. Harmonic component extraction from a chaotic signal based on EMD method [J]. Applied Mathematics & Mechanics, 2006, 27(2): 221-225(SCI)
16 Zhang W M, Meng G, Li H G. Adaptive vibration control of micro-cantilever beam with piezoelectric actuator in MEMS [J]. The International Journal of Advanced Manufacturing Technology, 2006, 28 (3-4): 321-327(SCI)
17 Li H G, Meng G. Detection of harmonic signals from chaotic interference by empirical mode decomposition [J]. Chaos, Solitons & Fractal, 2006, 30(4): 930-935(SCI)
18 Li H G, Meng G. Nonlinear dynamics of a SDOF oscillator with Bouc-Wen hysteresis [J]. Chaos, Solitons & Fractal, 2007, 34(2): 337-343(SCI)
19 Li H G, Meng G, Meng Z Q, Wen BC. Effects of boundary conditions on a self-excited vibration system with clearance [J]. International Journal of Nonlinear Sciences and Numerical Simulation, 2007, 8(4): 571-579(SCI)
20 Meng ZQ, Meng G, Li HG, Zhu J. Investigation on the nonlinear response of a balanced flexible rotor-bearing system [J]. International Journal of Nonlinear Sciences and Numerical Simulation, 2007, 8(1): 21-30(SCI)
21 Zhang XG, Guo KJ, Li HG, Hua HX, Meng G. Nonlinear rate dependent friction dynamics: Experiment and theoretical modeling [A], Wen TD: Conference Proceedings of ISTM/2007 VOLS 1-7 [C], 7th International Symposium on Test and Measurement, AUG 05-08, 2007, Beijing, China, International Academic Publishers Ltd, 4379-4382 (ISTP)
22 Zhang XG, Guo KJ, Li HG, Meng G. Experimental and theoretical investigations on friction modeling concerning accelerations in elevator systems [A], Batra RC et al: Proceedings of the International Conference on Mechanical Engineering and Mechanics 2007, Vols 1 And 2 [C], International Conference on Mechanical Engineering and Mechanics, NOV 05-07, 2007, Wuxi, China, Science Press USA INC, 1066-1072 (ISTP)
23 Guo K J, Zhang X G, Li H G, Meng G. Application of EMD method to friction signal processing [J]. Mechanical Systems and Signal Processing, 2008, 22(1): 248-259(SCI)
24 Guo K J, Zhang X G, Li H G, Meng G. A New Dynamical Friction Model [J]. International Journal of Modern Physics B, 2008, 22(8): 967-980(SCI)
25 Guo K J, Zhang X G, Li H G, Meng G. Non-reversible Friction Modeling and Identification [J]. Archive of Applied Mechanics, 2008, 78(10): 795-809(SCI)
26 Zhang X G, Guo K J, Li H G, Meng G. A new friction model for the slide guide in elevator systems: experimental and theoretical investigations [J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2008, 222(11): 2177-2189(SCI)
27 Gao S H; Meng G; Li H G; Jin, J P; Long X H. Non-linear dynamics of an unbalanced machine-tool spindle system supported by ball bearings [J]. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 2008, 222(3): 201-214(SCI)
28 Guo K J, Li H G, Meng G. A two-dimensional model for a slide guide system subjected to lateral displacement excitation [A]. He J H: 2007 International Symposium on Nonlinear Dynamics, October 2007, Shanghai, China [C], Institute of Physics and IOP Publishing Limited: Journal of Physics: Conference Series, 2008
29 Zhang X G, Li H G, Meng G. Experimental investigation of nonlinear frictional dynamics of the slide guide in elevator systems [A]. He J H: 2007 International Symposium on Nonlinear Dynamics, October 2007, Shanghai, China [C], Institute of Physics and IOP Publishing Limited: Journal of Physics: Conference Series, 2008
30 Guo Y J, Meng G, Li H G. Parameter determination and response analysis of viscoelastic material [J]. Archive of Applied Mechanics, 2009, 79(2): 147–155(SCI)
31 Meng G, Zhang W M, Huang H, Li H G, Chen D. Micro-rotor dynamics for micro–electro-mechanical systems (MEMS) [J], Chaos, Solitons & Fractal, 2009, 40(2): 538–562(SCI)
32 You J, Li H G, Meng G. Validity investigation of random energy flow analysis for beam structures [A]. 2nd International Conference on Vibro-Impact Systems, JAN 06-09, 2010 Sanya, PEOPLES R CHINA
33 Zhang Z Y, Chen Y, Li H G , Hua H X. Simulation and experimental study on vibration and sound radiation control with piezoelectric actuators [A]. 2nd International Conference on Vibro-Impact Systems, JAN 06-09, 2010 Sanya, PEOPLES R CHINA
34 You J, Meng G, Li H G. Random energy flow analysis of coupled beam structures and its correlation with SEA [J]. Archive of Applied Mechanics, 2011, 81(1): 37-50(SCI)
35 You J, Li H G, Meng G. Validity investigation of random energy flow analysis for beam structures [J]. Shock and Vibration, 2011, 18( 1-2): 269-280(SCI)
36 Zhang Z Y, Chen Y, Li H G, Hua H X. Simulation and experimental study on vibration and sound radiation control with piezoelectric actuators[J]. Shock and Vibration, 2011, 18( 1-2): 343-354(SCI)
37 You M Y, Li H G, Meng G. Control-limit preventive maintenance policies for components subject to imperfect preventive maintenance and variable operational conditions [J]. Reliability Engineering & System Safety, 2011, 96(5): 590-598(SCI)
38 Zhou Y, Li H G. Adaptive noise reduction method for DSPI fringes based on bi-dimensional ensemble empirical mode decomposition [J]. Optics Express, 2011, 19(19): 18207–18215(SCI)
39 Guo Y J, Meng G, Li H G. Dynamic response research of U shaped pipe with viscoelastic damping layer [J]. International Journal of Modern Physics B, 2011, 25(32): 4697-4708 (SCI)
40 Zhang T, Li H G, Zhao J J. Vibration control and Dynamical Model of a Thermal – Electrical - Mechanical Coupled Smart Cantilevered Beam [A]. 2011 International Conference on Mechatronics and Information Technology (2011 ICMIT), Advanced Engineering Forum (Volumes 2 - 3): 535-540
41 Yang B T, Zhang T, Li J Q, Li F C, Li H G, Meng G. Research on giant magnetostrictive actuator for low frequency adaptive vibration control [A], The Seventh International Conference on VIBRATION ENGINEERING AND TECHNOLOGY OF MACHINERY (VETOMAC-VII), Shanghai, CHINA, November 21-24, 2011.
42 Zhou S T, Sun Z H, Liu Y, Li H G. Dynamics stiffness analysis and modal identification on bearing support of high-speed dynamic balancing machine [A]. The Seventh International Conference on VIBRATION ENGINEERING AND TECHNOLOGY OF MACHINERY (VETOMAC-VII), Shanghai, CHINA, November 21-24, 2011.
43 Zhou Y, Li H G. A denoising scheme for DSPI fringes based on fast bi-dimensional ensemble empirical mode decomposition and BIMF energy estimation [J]. Mechanical Systems and Signal Processing, 2013, 35(1-2): 369-382 (SCI)
44 Zhang T, Yang B T, Li H G, Meng G. Dynamic modeling and adaptive control of a giant magnetostrictive actuator for vibration control [J]. Sensors and Actuators A: Physical, 2013, 190: 96 - 105 (SCI)
45 Qu Y G, Long X H, Li H G, Meng G. A variational formulation for dynamic analysis of composite laminated beams based on a general higher-order shear deformation theory [J]. Composite Structures, 2013, 102: 175 - 192 (SCI)
46 Zhou Y, Zhou S T, Zhong Z Y, Li H G. A de-illumination scheme for face recognition based on fast decomposition and detail feature fusion [J]. Optics Express, 2013, 21(9): 11294 - 11308 (SCI)
47 Zhang T, Li H G. Adaptive pole placement control for vibration control of a smart cantilevered beam in thermal environment [J]. Journal of Vibration and Control, 2013, 19(10) 1460 - 1470 (SCI)
48 Zhang T, Li H G, Cai G P. Hysteresis Identification and Adaptive Vibration Control for a Smart Cantilever Beam by a Piezoelectric Actuator [J]. Sensors and Actuators A: Physical, 2013, 203: 168 - 175 (SCI)
49 Zhou Y, Li H G. Enhancement strategy based on three-layer filtering for a single fringe pattern [J]. Optics Letters, 2013, 38(20): 4124-4127 (SCI)
50 Li M, Wang Y, Li F C, Li H G, Meng G. Modelica-based object-orient modeling of rotor system with multi-faults [J]. Chinese Journal of Mechanical Engineering, 2013, 26 (6): 1169-1181 (SCI)
51 Wan Z, Meng G, Li H G, Jing J P. Nonlinear Dynamics and Stability Analysis of a Multi-Disk Rotor-Bearing System with Flexible Coupling Misalignment [J]. Advances in Vibration Engineering, 2013, 12 (6): 541-558 (SCI)
52 Zhou S T, Sun Z H, Liu Y, Li H G, Dynamics stiffness analysis and modal identification on bearing support of large-scale high-speed dynamic balancing machine [J]. Advances in Vibration Engineering, 2013, 12 (6): 587-609 (SCI)
53 Zhu R, Meng G, Li H G, Jing J P, Ren J X, Bai H Y, Li M. Transient Characteristics Analysis of Thermal-Stress inStart-Stop Condition for Rotor System in Gas Turbine [J]. Advances in Vibration Engineering, 2013, 12 (6): 571-586 (SCI)
54 Yang B T, Zhang T, Li J Q, Li F C, Li H G. Research on Giant Magnetostrictive Actuator for Low Frequency Adaptive Vibration Control [J]. Advances in Vibration Engineering, 2013, 12 (6): 611-622 (SCI)
55 Zhu R, Meng G, Li H G. Development of parts family manage system based on PDM in large-scale air separation equipment [J]. Advanced Materials Research, 2013, 605-607: 288-291
56 Sun Z H, Li F C, Li H G. A numerical study of non-collinear mixing of three-dimensional nonlinear waves in an elastic half-space [A], Proceedings of Meetings on Acoustics (ICA 2013 Montreal), Montreal, CANADA, June 2–7, 2013.
57 Zhou S T, Zhong Z Y, Li H G, Li C. Comprehensive Comparisons of Random Space Transformation Methods between Rackwitz-Fiessler and Nataf-Pearson in Theory and Algorithm [C]. Proceedings of ASME 2013 International Mechanical Engineering Congress & Exposition, IMECE2013, San Diego, California, USA, November 15-21, 2013.
58 Zhong Z Y, Zhang W M, Zhou Y, Meng G, Li H G. Frequency shift of a nanowaveguide resonator driven by the tunable optical gradient force [J]. Journal of the Optical Society of America B - Optical Physics, 2014, 31(4): 96-104 (SCI)
59 Zhang T, Li H G, Cai G P, Li F C. Experimental Verifications of Vibration Suppression for a Smart Cantilever Beam with a Modified Velocity Feedback Controller [J]. Shock and Vibration, 2014, 2014(172570):1-9 (SCI)
60 Bai H Y, Liu X X, Li H G, Zhang W M, Meng G, Li M, Wang X H. Nonlinear dynamic characteristics of a large‑scale tilting pad journal bearing‑rotor system [J]. Journal of Vibroengineering, 2014, 16(8): 4045-4064 (SCI)
61 Li F C, Liu Z Q, Sun X W, Li H G, Meng G. Propagation of guided waves in pressure vessel [J]. Wave Motion, 2015, 52: 216-228 (SCI)
62 Li M, Li C, Liu X B, Li H G, Li F C, Meng G. Nonlinear rotor dynamics on turbo expander with unbalanced bearing force caused by temperature difference [J]. Journal of Vibroengineering, 2014, 17(1): 33-46 (SCI)
63 Wang X H, Li H G, Li M, Bai H Y, Meng G, Zhang H. Dynamic characteristics of magnetorheological fluid lubricated journal bearing and its application to rotor vibration control [J]. Journal of Vibroengineering, 2015, 17(4): 1912-1928 (SCI)
64 Qu Y G, Wu S H, Li H G, Meng G. Three-dimensional free and transient vibration analysis of composite laminated and sandwich rectangular parallelepipeds: Beams, plates and solids [J]. Composites Part B: Engineering, 2015, 73: 96-110 (SCI)
65 Chen L X, Li S H, Liu K, Cai G P, Li H G. Time delay control of hysteretic composite plate [J]. Smart Materials and Structures, 2015, 24(4): 045046 (SCI)
66 Li M, Li F C, Jing B B, Bai H Y, Li H G, Meng G. Multi-fault diagnosis of rotor system based on differential-based empirical mode decomposition [J]. Journal of Vibration and Control, 2015, 21(9): 1821-1837 (SCI)
67 Li F C, Sun X W, Qiu J X, Zhou L M, Li H G, Meng G. Guided wave propagation in high-speed train axle and damage detection based on wave mode conversion [J]. Structural Control & Health Monitoring, 2015, 22: 1133-1147 (SCI)
68 Zhang T, Li H G, Zhong Z Y, Cai G P. Hysteresis model and adaptive vibration suppression for a smart beam with time delay [J]. Journal of Sound and Vibration, 2015, 358: 35-47 (SCI)
69 Zhang Z, Li H G, Meng G, Liu C. A novel approach for the prediction of the milling stability based on the Simpson method [J]. International Journal of Machine Tools and Manufacture, 2015, 99: 43-47 (SCI)
70 Sun Z H, Li F C, Li H G. Two way collinear interaction of longitudinal waves in an elastic medium with quadratic nonlinearity [J]. Journal of Vibroengineering, 2014, 17(7): 3988-3997 (SCI)
71 Li F C, Sun Z H, Li H G, Zhou L M. A Nonlinear Ultrasound Method for Fatigue Evaluation of Marine Structures [J], Materials Science Forum, 2015, 813:116-23
72 Lu W, Li H G, Zhang H. Modeling and identification of nonlinear torsion in harmonic drives[C]. the 7th International Conference on Vibration Engineering, Shanghai, China, 2015.
73 Sun Z H, Li F C, Li H G. Non-collinear mixing of two-dimensional nonlinear waves in an elastic half-space using a finite difference scheme[C]. the 7th International Conference on Vibration Engineering, Shanghai, China, 2015
74 Li C, Liu Z L, Li M, Li H G, Li Y, Liu W K. Subharmonic Resonance of Geometrical Nonlinear Structure in 2-D Periodic Elastic System for Mechanical Wave Filtering [C]. 10th International Workshop on Structural Health Monitoring, Stanford, US, 2015
75 Zhao J J, Miao X T, Li F C, Li H G, A Novel Probabilistic Diagnostic Algorithm-Based Damage Localization for Aluminum Plate with Non-uniform Section [C]. 10th International Workshop on Structural Health Monitoring, Stanford, US, 2015
76 Li M, Liu X X, Zhu R, Wang X H, Bai H Y, Li F C, Li H G, Meng G. Rotor dynamics behavior of tilting pad bearing supported turbo-expander considering temperature gradient [J]. Journal of Computational and Nonlinear Dynamics, 2016, 11(2): 021004-1-16 (SCI)
77 Li H G, Li M, Zhou S T, Wang X H, Zhu R, Bai H Y, Li F C, Meng G. Rotor dynamics behavior of turbo-expander involving droplet impact [J]. Mathematical and Computer Modelling of Dynamical Systems, 2016, 22(5): 444-462 (SCI)
78 Zhang Z, Li H G, Meng G, Tu X T, Cheng C M. Chatter detection in milling process based on the energy entropy of VMD and WPD [J]. International Journal of Machine Tools and Manufacture, 2016, 108: 106-112 (SCI)
79 Sun Z H, Li F C, Li H G. A numerical study of non-collinear wave mixing and generated resonant components [J]. Ultrasonics, 2016, 71: 245-255 (SCI)
80 Li M, Bai H Y, Wang X H, Li H G, Li F C, Meng G. Dynamic Saint-Venant principle for rotor system with undetectable initial crack [J]. Archive of Applied Mechanics, 2016, 86(11): 1841-1851 (SCI)
81 Lu W, Li H G, Li X J, Li C. Modeling and analysis of clearance in a gear assembly for solar array drive assembly [J]. Journal of Vibration Engineering & Technologies, 2016, 4(5): 467-474 (SCI)
82 Li H G, Hu Y, Li F C, Meng G. Succinct and fast empirical mode decomposition [J]. Mechanical Systems and Signal Processing, 2017, 85: 879-895 (SCI)
83 Li H G, Li M, Li C, Li F C, Meng G. Multi-faults decoupling on turbo-expander using differential-based ensemble empirical mode decomposition [J]. Mechanical Systems and Signal Processing, 2017, 93: 267-280 (SCI)
84 Hu Y, Li F C, Li H G, Liu C L. An enhanced empirical wavelet transform for noisy and non-stationary signal processing [J]. Digital Signal Processing, 2017, 60: 220-229 (SCI)
85 Zhu R, Zhang Y R, Ren J X, Li H G, Han Q K. Nonlinear dynamics study of a high-temperature rotor-bearing-seal system in gas turbine [J]. Journal of Vibroengineering, 2017, 19(1): 629-640 (SCI)
86 Zhang Z, Li H G, Meng G, Ren S, Zhou J W. A new procedure for the prediction of the cutting forces in peripheral milling [J]. The International Journal of Advanced Manufacturing Technology, 2017, 89(5-8): 1709-1715 (SCI)
87 Li F C, Li H G, Qiu J X, Meng G. Guided wave propagation in H-beam and probability-based damage localization [J]. Structural Control and Health Monitoring, 2017, 24(5): e1916 (SCI)
88 Lu W, Li H G, Li X J, Li C. Bifurcations and chaos in a gear assembly with clearances for solar array drive assembly [J]. Journal of Vibroengineering, 2017, 19(4): 3030-3039 (SCI)
89 Zhou S T, Wu X, Li H G, Sun Y Y. Critical speed analysis of flexible rotor system with stochastic uncertain parameters [J]. Journal of Vibration Engineering & Technologies, 2017, 5(4): 319-328 (SCI)
90 Zhang Z, Li H G, Meng G, Ren S. Milling chatter suppression in viscous fluid: a feasibility study [J]. International Journal of Machine Tools and Manufacture, 2017, 120: 20-26 (SCI)
91 Wang X H, Li H G, Lu W, Meng G. Stiffness and damping properties of (semi) floating ring bearing using magnetorheological fluids as lubricant [J]. Journal of Tribology – Transactions of the ASME, 2017, 139(5): 051701-1-11 (SCI)
92 Wang X H, Li H G, Meng G. Rotordynamic coefficients of a controllable magnetorheological fluid lubricated floating ring bearing [J]. Tribology International, 2017, 114: 1-14 (SCI)
93 Hu Y, Tu X T,Li F C, Li H G, Meng G. Hu Y, Li F C, Li H G, Liu C L. An enhanced empirical wavelet transform for noisy and non-stationary signal processing [J]. Journal of Sound and Vibration, 2017, 409: 241-255 (SCI)
94 Zhang Z, Li H G, Liu X B, Zhang W Y, Meng G. Chatter mitigation for the milling of thin-walled workpiece [J]. International Journal of Mechanical Sciences, 2018, 138-139: 262-271 (SCI)
95 Zhao J J, Miao X T, Li F C, Li H G. Probabilistic diagnostic algorithm-based damage detection for plates with non-uniform sections using the improved weight function [J]. Journal of Vibration Engineering & Technologies, 2018, 6(3): 249-260 (SCI)
96 Zhao J J, Miao X T, Li F C, Li H G. Wave Propagation in Aluminum Honeycomb Plate and Debonding Detection Using Scanning Laser Vibrometer [J]. Sensors, 2018, 18(6): 1669 (SCI)
97 Li M, Meng G, Li H G, Qiu J X, Li F C. Online Structural Health Monitoring of Rotating Machinery via Ultrasonic Guided Waves [J]. Shock and Vibration, 2018: 8142371 (SCI)
98 Liu Y, Li H G, Li Y, Du H Y. A Component-Based Parametric Reduced-Order Modeling Method Combined with Substructural Matrix Interpolation and Automatic Sampling [J]. Shock and Vibration, 2019: 6407437 (SCI)
99 Liu Y, Du H Y, Li H G, Li F C, Sun W. An Improved Method for Parametric Model Order Reduction by Matrix Interpolation [J]. Journal of Vibration Engineering & Technologies, 2019: 7(6): 603-610 (SCI)
100 Meng L L, Li F C, Li H G. Dynamic model and analysis of a dielectric elastomer vibration isolator [J]. Journal of Intelligent Material Systems and Structures, 2019: 30(16): 2396-2404 (SCI)
