1997-2000, Jilin University of Technology, Doctor
1994-1997, Jilin University of Technology, Master
1990-1994, Jilin University of Technology, Bachelor

2009—present, Professor, School of Mechanical Engineering, Shanghai Jiao Tong University
2002—2008, Associate Professor, School of Mechanical Engineering, Shanghai Jiao Tong University
2000—2002, Postdoctor,Department of Plastic Forming, Shanghai Jiao Tong University

2007.10-2008.3 University of Michingan, Ford Research and Innovation Center, Visiting
2014.12-2015.10 The Ohio State University, Visiting

Elasto-plastic Finite element method.
CAD/CAE techniques in mechanical design and forming process.
Plastic forming theory and simulation technology

1．2005-2007, National Natural Science Foundation of China, “Large deformation mechanism and process simulation of the magnesium sheet”.
2．2008-2010, Program for New Century Excellent Talents in University,"Multi-scale study on the deformation mechanism and formability of magnesium sheet”.
3．2009-2011, Shanghai Key Basic Research Foundation “Cage-roll forming theory and process design methodology of ERW pipes.
4．2006-2008, Sub-program of Shanghai Key Industry Project ,“Dynamic deformation theory and application of advanced high strength steel.
5．2006-2008, Shanghai International Cooperation Project “Roll design and process optimization of roll forming based on the whole-process simulation.
6．Project from Bao steel company ,“process optimization of roll forming of ERW pipes. 2005.2～2007.2.
7．2009-2011, University Research Project (URP) of Ford Motor Company“Integrated Computational Materials Engineering (ICME) Methodology Development for Alloy Design & Defects Control for Al & Mg Forming-stage II”.
8．2006-2013,Project from Daikin Industries Co. Ltd., "Research on Plastic Forming of Heat Exchangers".
9. 2012-2013，Project from Baosteel,"FE simulation system development for UOE forming".
10. 2009-2011,URP project from Ford Motor Company,"Integrated Computational Materials Engineering (ICME) Methodology Development for Alloy Design & Defects Control for Al & Mg Forming-Stage II".
11. 2012-2015, NSFC project,"Forming limit prediction of magnesium alloy sheets based on crystalline plasticity models".
12. 2013-2015，URP project from Ford Motor Company,"Life Assessment of Spot Welds based on Crack Propagation".
13. 2017-2020, NSFC project "Integrated modeling of polycrystal plasticity and dynamic recrystalization for hot forming of magnesium alloys".

1. Dayong Li, Robert H. Wagoner, The Nature of Yielding and Anelasticity in Metals. Acta Materialia. 2021, 116625. https://doi.org/10.1016/j.actamat.2021.116625
2. Guanghan Wu, Dayong Li⁎ , Wei-Jen Lai, Yandong Shi, Hongtae Kang, Yinghong Peng, Xuming Su. Fatigue behaviors and mechanism-based life evaluation on SPR-bonded aluminum joint. International Journal of Fatigue 142 (2021) 105948.
3. Zihan Li, Guowei Zhou, Dayong Li*, Mukesh K.Jain, Yinghong Peng, Peidong Wu. Forming limits of magnesium alloy AZ31B sheet at elevated temperatures. International Journal of Plasticity, 2020, 135: 102822. https://doi.org/10.1016/j.ijplas.2020.102822
4. Guowei Zhou, Qingping Sun, Dayong Li, Zhaoxu Men, YinghongPeng, DanielleZeng, XumingSu. Effects of fabric architectures on mechanical and damage behaviors in carbon/epoxy woven composites under multiaxial stress states. Polymer Testing, 2020, 90, 106657. https://doi.org/10.1016/j.polymertesting.2020.106657.
5. Guanghan Wu, Dayong Li*, Wei‐Jen Lai， Qiuren Chen，Yandong Shi，Li Huang， Shiyao Huang, Hongtae Kang, Yinghong Peng, Xuming Su. Experimental and numerical evaluations on the effects of adhesive fillet, overlap length and unbonded area in adhesive‐bonded joints. Fatigue & Fracture of Engineering Materials & Structures. 2020, https://doi.org/10.1111/ffe.13294
6. Weiqin Tang, Guowei Zhou, Yichuan Shao, Dayong Li*, Yinghong Peng, Huamiao Wang. On the role of yttrium in microstructure evolution and texture modification during magnesium alloy extrusion. Materials Characterization, 2020, 162, 110189.
7. S.F. Chen, D.Y. Li, S.H. Zhang, H.N. Han, H.W. Lee, M.G. Lee. Modelling continuous dynamic recrystallization of aluminum alloys based on the polycrystal plasticity approach. International Journal of Plasticity, 2020,141, 102710.
8. Guowei Zhou, Qingping Sun, Joel Fenner, Dayong Li*, Danielle Zeng, Xuming Su, Yinghong Peng. Crushing behaviors of unidirectional carbon fiber reinforced plastic composites under dynamic bending and axial crushing loading. International Journal of Impact Engineering, 2020, 140, 103539
9. Zhiheng Zhang, Zhenye Liang, Dayong Li*, Shichao Ding. Clamp forming of local features on sheet metals. Journal of Materials Processing Technology, 2020, 275, 116331.
10. Kai Li, Tianxia Zou, Dayong Li*, Yinghong Peng, Da Shu. On formation of abnormally large grains in annealing pre-strained aluminum alloy multi-port extrusion tubes. Metallurgical and Materials Transactions A, 2019, 50: 5734–5749.
11. Tao Tang, Guowei Zhou, ZihanLi, Dayong Li*, Liming Peng, Yinghong Peng, Peidong Wu, Huamiao Wang, Myoung-Gyu Lee. A polycrystal plasticity based thermo-mechanical-dynamic recrystallization coupled modeling method and its application to light weight alloys. International Journal of Plasticity, 2019, 116(5): 159-191.
12. Yangguang Li, Zhenye Liang, Zhiheng Zhang, Tianxia Zou, Dayong Li*, Shichao Ding, Hua Xiao, Lei Shi. An Analytical Model for Rapid Prediction and Compensation of Springback for Chain-die Forming of an AHSS U-channel. International Journal of Mechanical Sciences, 2019, 159: 195-212.
13. Kai Li, Dayong Li, Tianxia Zou, Da Shu, Ding Tang, and Yinghong Peng. Strength Variation in Processing Multiport Extrusion Tubes of A1100 and A3102 Alloys. Journal of Materials Engineering and Performance. https://doi.org/10.1007/s11665-019-04132-w.
14. Weiye Chen, Jinmao Jiang, Dayong Li*, Tianxia Zou, Yinghong Peng. Flower pattern and roll positioning design for the cage roll forming process of ERW pipes. Journal of Materials Processing Technology, 2019, 264(2): 295-312.
15. Guowei Zhou, Zihan Li, Dayong Li*, Yinghong Peng, Huamiao Wang, Peidong Wu. Misorientation Development in Continuous Dynamic Recrystallization of AZ31B Alloy Sheet and Polycrystal Plasticity Simulation. Materials Science and Engineering: A, 2018, 730 (7): 438-456.
16. Huamiao Wang, Peidong Wu, Srihari Kurukuri, Michael J. Worswick, Yinghong Peng, Ding Tang, Dayong Li*. Strain rate sensitivities of deformation mechanisms in magnesium alloys. International Journal of Plasticity, 2018, 107(8): 207-222 .
17. Yaguang Li, Yong Sun, Hua Xiao, Hyuk Jong Bong, Lei Shi, Shuhui Li, Dayong Li*, Shichao Ding*, R.H. Wagoner. A numerical study on chain-die forming of the AHSS U-channel and contrast with roll forming, International Journal of Mechanical Sciences 2018, 135: 279–293.
18. Tao Tang, Yichuan Shao, Dayong Li*, Liming Peng, Yinghong Peng, Shaorui Zhang, Peidong Wu. Polycrystal plasticity simulation of extrusion of a magnesium alloy round bar: Effect of strain path non-uniformity, Journal of Alloys and Compounds, 2018, 730: 161-181.
19. Guanghan Wu, Dayong Li*, Xuming Su, Yinghong Peng, Yandong Shi, Li Huang, Shiyao Huang, Weiqin Tang. Experiment and Modeling on Fatigue of the DP780GI Spot Welded Joint, International Journal of Fatigue, 2017, 103(10): 73-85.
20. Guowei Zhou, Zihan Li, Dayong Li*, Yinghong Peng, Hatem S. Zurob, Peidong Wu. A polycrystal plasticity based discontinuous dynamic recrystallization simulation method and its application to copper. International Journal of Plasticity, 2017,91：48－76.
21. D.Y. Li, Z. Chen, L. Sun, J.W. Lee, R.H. Wagoner. An improved test for shear fracture. International Journal of Solids and Structures, 2016, 97-98: 29-42.
22. X.H. Fan, D. Tang, W.L. Fang, D.Y. Li, Y.H. Peng. Microstructure development and texture evolution of aluminum multi-port extrusion tube during the porthole die extrusion. Materials Characterization, 2016, 118: 468-480.
23. Guowei Zhou, Mukesh K. Jain, Peidong Wu, Yichuan Shao, Dayong Li*, Yinghong Peng, Experiment and crystal plasticity analysis on plastic deformation of AZ31B mg alloy sheet under intermediate temperatures: how deformation mechanisms evolve, International Journal of Plasticity, 2016, 79: 19-47.
24. Tianxia Zou, Dayong Li*, GuanghanWu, Yinghong Peng. Yield strength development from high strength steel plate to UOE pipe, Materials and Design, 2016, 89(1): 1107–1122.
25. Zhong Chen, Hyuk Jong Bong, Dayong Li, R.H. Wagoner. The elastic-plastic transition of metals. International Journal of Plasticity, 2016, 83(8): 178-201.
26. Yichuan Shao, Tao Tang, Dayong Li*, Guowei Zhou, Shaorui Zhang, Yinghong Peng. Polycrystal modeling of hot extrusion texture of AZ80 magnesium alloy. Transactions of Nonferrous Metals Society of China, 2016, 26(4): 1063–1072.
27. Yichuan Shao, Tao Tang, Dayong Li*, Weiqin Tang and Yinghong Peng. Crystal plasticity finite element modelling of the extrusion texture of a magnesium alloy, Modelling and Simulation in Materials Science and Engineering, 2015,23: 055011 (19pp)
28. Tianxia Zou, GuanghanWu, DayongLi*, QiangRen ,JiyuanXin, YinghongPeng. A numerical method for predicting O-forming gap in UOE pipe manufacturing, International Journal of Mechanical Sciences, 2015,98:39–58.
29. Qiang Ren, Tianxia Zou, Dayong Li*, Ding Tang, Yinghong Peng. Numerical study on the X80 UOE pipe forming process, Journal of Materials Processing Technology, 2015, 215 (1): 264-277.
30. Weiqin Tang, Shiyao Huang, Dayong Li*, Yinghong Peng. Mechanical anisotropy and deep drawing behaviors of AZ31 magnesium alloy sheets produced by unidirectional and cross rolling, Journal of Materials Processing Technology, 2015, 215 (1): 320-326.
31. Guowei Zhou, K. Ananthaeswara, G. Mitukiewicz, Dayong Li, R.K. Mishra, M.K. Jain, FE simulations of gas blow forming and prediction of forming limit diagram of AZ31 magnesium sheet, Journal of Materials Processing Technology, 2015, 218: 12–22.
32. X. H. Fan, M. Li, D. Y. Li, Y. C. Shao, S. R. Zhang, Y. H. Peng. Dynamic recrystallization and dynamic precipitation in AA6061 aluminium alloy during hot deformation, Materials Science and Technology, 2014, 30(11): 1263 – 1272.
33. Weiqin Tang, Dayong Li*, Shiyao Huang, Shaorui Zhang, Yinghong Peng. Simulation of texture evolution in magnesium alloy: Comparisons of different polycrystal plasticity modeling approaches. Computers & Structures, 2014, 143(9): 1-8.
34. Ding Tang, Qingqing Zhang, Dayong Li, Yinghong Peng. A physical simulation of longitudinal seam welding in micro channel tube extrusion. Journal of Materials Processing Technology, 2014, 214(11): 2777-2783.
35. Y. Shi, P. D. Wu, D. J. Lloyd and D. Y. Li . Effect of Rate Sensitivity on Necking Behavior of a Laminated Tube Under Dynamic Loading. Journal of Applied Mechanics (Transactions of the ASME). 2013, 81(5): 05010.
36. L. M. Li, D. Y. Li*, Y. H. Peng， The simulation of sheet metal forming processes via integrating solid-shell element with explicit finite element method, Engineering with Computers. 2011, 27(3): 273-284.
37. LI L M., PENG Y. H., LI D. Y.*, A stabilized underintegrated enhanced assumed strain solid-shell element for geometrically nonlinear plate/shell analysis, Finite Elements in Analysis and Design, 2011, 47: 511-518.
38. Weiqin Tang, Shaorui Zhang, Yinghong Peng, Dayong Li , Influence of Extrusion parameters on grain size and texture distribution, Journal of Materials Processing Technology, 2011, 211: 1203–1209.
39. Ding Tang, Yinghong Peng, Dayong Li. Mechanical expansion of thick-walled micro-groove tube for high pressure ACR system. Journal of Pressure Vessel Technology (Transactions of the ASME). 2011, 132(2): 1202-1209.
40. Ding Tang, Dayong Li, Yinghong Peng, Zhaohui Du. Optimisation to the tube-fin contact status of the tube expansion process. Journal of Materials Processing Technology. 2011, 211(4): 573-577.
41. Xiaohui FAN, Weiqin TANG,Shaorui ZHANG, Dayong LI, Yinghong PENG, Effects of dynamic recrystallization in extruded and compressed AZ31 magnesium alloy, Acta Metallurgica Sinica(English letters), 2010, 23(5) : 334-342.
42. Shaorui Zhang, Yinghong Peng, Weiqin Tang,Dayong Li, The polycrystalline plasticity due to slip and twinning, Acta Mech., 2010, 212:293–303.
43. Li Juan Hu, Ying Hong Peng, Da Yong Li, and Shao Rui Zhang, Influence of Dynamic Recrystallization on Tensile properties of AZ31 magnesium alloy sheet, Materials and Manufacturing Processes, 2010, 25: 880–887.
44. Ding Tang, Dayong Li, Yinghong Peng, Zhaohui Du, A new approach in evaluation of thermal contact conductance of tube-fin, Applied Thermal Engineering, 2010, 30: 1991-1996.
45. Qingqing Zhang, Ding Tang, Dayong Li, Yinghong Peng, Numerical and experimental study on in-plane bending of microchannel aluminum flat tube, Journal of Materials Processing Technology, 2010, 210: 1876–1884.
46. Ding Tang, Yinhong Peng, Dayong Li. Numerical and experimental study on expansion forming of inner grooved tube. Journal of Materials Processing Technology. 2009, 209: 4668-4674.
47. Jinmao Jiang, Dayong Li, Yinhong Peng, JianXin Li. Research on strip deformation in the cage roll forming process of ERW round pipes. Journal of Materials Processing Technology. 2009, 209: 4850-4856.
48. Ding Tang, Yinhong Peng, Dayong Li*. Experimental and numerical study on expansion of thick-walled micro-groove tube. Journal of Mechanical Engineering Science. 2009, 223: 689-696.
49. Ding Tang, Dayong Li*, Yinhong Peng. Roles of surface booster system on bending of thin-walled copper tube. Journal of Materials Engineering and Performance. 2009, 18: 369–377.
50. Weiqin Tang, Shaorui Zhang, Yinghong Peng, Dayong Li*, Simulation of magnesium alloy AZ31 sheet during cylindrical cup drawing with rate independent crystal plasticity finite element method, Computational Material Sciences, 2009, 46: 393-399.
51. Dayong Li, Yinghong Peng, Shaorui Zhang, Numerical simulation of sheet metal stamping by using ODF data, International Journal of Mechanical Sciences. 2009, 59(1): 41-51.
52. Luo Yingbing, Li Dayong, Peng Yinghong, Formability and cavitation behavior of superplastic AA5083 aluminum alloy under biaxial tension, Transaction of Nonferrous Metal Society of China, 2006, 16: 1630-1633.
53. Hu L J, Zhang S R, Li D Y, Peng Y H. Numerical analysis of influence of micro-parameters on macro-micromechanical properties of fiber reinforced metal matrix composites, Journal of Materials Processing Technology, 2008, 201(1-3): 736-741.
54. Yinghong Peng, Ding Tang and Dayong Li*, Study on the influence of mandrel type on copper tube rotary draw bending. International Journal of Materials and Product Technology, 2008, 32(4): 406-422.
55. Yinghong Peng, Jinmao Jiang, Dayong Li*, Jianzeng Han, Jianxin Li. Simulation of cage roll forming process of ERW pipes. International Journal of Materials and Product Technology, 2008, 32(4): 388-405.
56. Dayong Li, Yingbing Luo, Yinghong Peng. The Numerical and Analytical Study on Stretch Flanging of V-Shaped Sheet Metal, Journal of Materials Processing Technology, 2007, 189:262-267.
57. Dayong Li, Yinghong Peng, Jilong Yin, Optimization of metal forming process via a hybrid intelligent optimization technique, Structural and Multidisciplinary Optimization, 2007, 34: 229-241.
58. QunFeng Chang, Dayong Li, Yinghong Peng, Xiaoqin Zeng. Experimental and numerical study of warm drawing of AZ31 magnesium alloy sheet. International Journal of Machine Tools & Manufacture. 2007, 47: 436–443.
59. Jilong Yin, Dayong Li, Yinghong Peng，Knowledge Acquisition from Metal Forming Simulation，The International Journal of Advanced Manufacturing Technology, 2006, 29(3-4): 279-286.

60. 苏旭明，郑鑫，李大永. 汽车设计的耐久性分析[M]. 机工工业出版社, 2016.

国际学术会议报告：

1) Dayong Li, Recent progress on Chain-die forming. the 6th International Conference on Advanced Steels, Invited speech, Jeju, Korea, 2018.
2) Dayong Li, A crystal plasticity study on the deformation of an AZ31 alloy sheet under elevated temperature, The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Keynote speech, Tokyo, Japan, 2018.
3) Dayong Li, A polycrystal plasticity based thermal-mechanical-DRX coupled modeling method, The 24th International Conference on Plasticity, Damage and Fracture, Keynote speech, Puerto Rico, 2018.
4) Dayong Li, Chain-die forming of AHSS, Materials Science & Technology 2017, Invited speech, Pittsburgh, USA, 2017.
5) Dayong Li, A polycrystal plasticity based discontinuous dynamic recrystallization simulation method and its application to copper, The 23th International Conference on Plasticity, Damage and Fracture, Keynote speech, Mexico, 2017.
6) 李大永，Formability Analysis of Aluminum and Magnesium Alloys Sheets by Using Crystal Plasticity Method，国际材联第十七届亚洲材料大会暨中国材料大会，邀请报告，中国青岛，2016.
7) 李大永，铝合金微通道管材挤压成形中的材料集成计算工程，“新材料国际发展趋势高层论坛”，邀请报告，中国南京，2016.
8) Dayong Li, Numerical simulation of X90 UOE pipe forming process. The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Australia, 2014.
9) Dayong Li, Study on extrusion of aluminum microchannel flat tubes, The 11th International Conference on Numerical Methods in Industrial Forming Processes, Invited speech. China, 2013.
10) Dayong Li, A virtual design system for the cage roll forming process of ERW pipes. 15th International Conference on Advances in Materials and Processing Technologies, Invited speech, Australia, 2012.
11) Dayong Li, Application of crystalline plasticity finite element method in simulation of plastic forming of AZ31 alloy, 7th Pan-Yellow Sea Rim International Symposium on Magnesium Alloys and their Applications, Invited speech, China, 2012.
12) Dayong Li, Dieless bending of flat-tube heat exchangers, The 10th International Conference on Technology of Plasticity, Germany, 2011.


博士学位论文：
李凯，铝合金微通道挤压扁管矫形退火中的组织演化，2019。
李亚光，先进高强钢U型零件链模成形研究， 2019。
汤韬，镁合金挤压成形热力耦合晶体塑性-动态再结晶集成计算，2018。
范晓慧，微通道铝扁管成形中组织演化的微观表征与模拟研究，2016.
周国伟，AZ31B镁合金板材温热塑性变形机制与成形极限的实验与理论研究，2016.
邵一川，镁合金挤压成形晶体塑性-动态再结晶集成计算模型，2016.
邹天下，高强度UOE钢管成形建模与工艺稳健设计，2015.
张卿卿，铝合金微通道挤压扁管成形技术研究，2012.
唐伟琴，AZ31镁合金板材的晶体塑性理论模型与冲压成形性能研究，2011。
李丽明，面向板料成形有限元分析的实体壳单元的研究及其在辊弯成形中的应用，2010。
黄诗尧，AZ31镁合金挤压成形微观组织演化的试验研究与数值模拟， 2010.
蒋劲茂，直缝焊管排辊成形机理与工艺设计方法研究，2009.
唐鼎，内螺纹管-波纹翅片式换热器成形加工关键技术研究，2009.
胡丽娟，AZ31镁合金板材温热变形行为的数值分析与试验研究，2009。
苌群峰，镁合金板材温热冲压成形理论与实验研究，2008.
罗应兵，轻合金超塑性变形机理与成形工艺研究，2007.
王迎春，薄板坯连铸液芯压下工艺数值模拟研究，2006.
尹纪龙，基于塑性成形数值仿真的知识繁衍技术，2005.
张少睿，板成形率无关晶体塑性理论与过程模拟，2004.

硕士学位论文：
Wouter Vanoverberghe, Temperature field optimization of the hot stamping die surface, 2019.
陈伟业，变强度B柱热冲压热区模面优化设计及其温度控制，2019。
张智恒，附带局部特征帽形件的链模成形技术研究，2019。
罗健玺，不锈钢型材拉弯成形工艺数值模拟及加载路径优化设计，2018.
李贤睿，微通道扁管热挤压成形过程及承压性能有限元仿真研究，2017.
黄慧琳，高强度U型钢链模成形有限元仿真研究，2017.
卢锴钧，双压点电梯导轨校直关键技术研究，2016.
郭飞鹏，薄壁铝翅片成形与优化研究，2016.
周宁，折叠微通道扁管辊弯成形及承压性能有限元仿真研究，2016.
Clément LABRUGERE，Finite Element Analysis of a Flat-tubes Heat Exchanger’s Die-less Bending Using a Cohesive Zone Damage Model，2016.
蒋祥荣，级间管—翅换热器的机械胀接模拟与实验研究，2015。
张宇，基于疲劳裂纹扩展的焊点疲劳寿命预测，2015.
刘重飞，一种双面快速转向反射镜结构设计与研究，2015.
辛纪元，油套管特殊螺纹接头结构仿真研究与结构优化，2015.
刘振勇，5754_H111铝合金板材成形极限实验及数值模拟，2014.
陈梓荣，星载激光测距仪结构设计与仿真分析，2014.
纪宗臣，UOE焊管成型工艺三维有限元仿真研究，2014.
吴兴彬，聚四氟乙烯本构模型开发及计量泵密封结构仿真研究，2014.
王卓，微通道平行流换热器无模弯曲成形模拟与实验研究，2013.
赵阳，UOE焊管成型过程仿真研究，2013.
张志伟，微通道平行流换热器成形加工关键技术研究，2012.
钟敏，AZ31镁合金板材温热成形极限及回弹研究，2012。
徐志伟，往复泵曲轴疲劳强度分析及动载荷测试，2011。
高宇飞，排辊成形工艺参数化设计系统集成开发技术， 2010.
陈殿苹，微通道扁管面内绕弯成形过程的数值仿真及知识发现，2010.
黄华，高强铝合金板材温热成形实验与理论研究，2010。
史文超，TRIP780高强钢动态变形行为的宏微观研究，2009.
张鹏，空调管翅式换热器成形工艺的仿真研究，2008.
田成达，DP780高强钢动态力学行为研究，2008。
谷中莹，基于有限元仿真的erw焊管排辊成型孔型的研究，2008.
李友峰，宝钢ERW610焊管成型机组参数化建模技术，2007.
仇素萍，方管双辊交互式辊弯成形新技术的数值仿真研究，2007.
王永宁，铝蜂窝模型及其在汽车碰撞壁障数值模拟中的应用，2007。
谢敏，基于Web的塑性成形仿真可视化技术研究，2005.
董俊，基于知识的铝型材挤压模具智能设计的关键技术研究，2004.
罗应兵，镁合金薄板冲压成形数值模拟关键技术研究，2004.

1. Modern CAE Technology and Application
For Master students
Credit hour：36
Credit：2

2.Engineering Materials
For undergraduate
Credit hour：51
Credit：3

3.Mechanical Optimization
For undergraduate
Credit hour：51
Credit：3

2007―2011 Member of Academic Committee of Plastic Forming Theory and Digialization, China Plastic Forming Acadamy.
2007―2016 Member of Mechanics' Application Commitee, China Mechanics Acadamy.

2006 Shanghai Qi Ming Xing Program of Science and Technology
2007 　 Shanghai Science and Technology Progress Award
2007 Distinguished Young Scholars of Ministry of Education New Century Outstanding Young Professors Promotion Program
2009 Shanghai Qi Ming Xing Post-Program of Science and Technology
2013 Science & Technology Progress Award, Ministry of Education
2014 National Science & Technology Progress Award