研究生教学网
一、学科简介 Introduction
本学科始建于交通大学1913年创立的电气机械科,1921年建立机械科,自1956年开始招收研究生,是首批有权授予硕士和博士学位的学科,1998年获得我国首批一级学科博士授予权,并拥有博士后流动站。在教育部2008和2012年学科评估中均排名第一,2015年入选上海市I类高峰学科支持计划,2017年教育部学科评估列为A+学科,并入选国家“双一流”建设学科。
Mechanical Engineering of SJTU can be dated back to the initation of the electromechanics branch by Jiao Tong University in 1913, which was later reorganized as the mechanical branch in 1921 and started to enroll graduate students in 1956 as one of the first disciplines entitled to have master and PhD programs. The discipline was amongst the first batch of universities in 1998 authorized to confer doctoral degree as well as postdoctoral fellows. The discipline ranked first in the discipline assessments by Ministry of Education in 2008 and 2012. In 2015, it was selected into “Shanghai Class I Peak Discipline Support Plan”. In 2017, it was ranked A+ in the discipline assessment and was selected as the national “Double First Class” academic discipline.
本学科覆盖了机械制造及自动化、机械设计及理论、机械电子工程和车辆工程等4个rr本学科设有制造技术与装备自动化、智能制造与信息工程、机器人、重大装备设计与控制工程、生物医学制造与生命质量工程、机电控制与物流装备、机电设计与知识工程、振动冲击噪声、薄板结构制造、智能汽车10个研究所。拥有机械系统与振动国家重点实验室、汽车电子控制技术国家工程实验室、振动冲击噪声国防重点学科实验室,以及复杂薄板结构数字化制造、网络制造与企业信息化两个上海市重点实验室。已形成175人的专职教师队伍,包括院士2人、973首席科学家5人、国家特聘专家3人、长江特聘教授8人、杰青7人、优青8人。学科中青年学术队伍积极服务国家先进制造领域发展战略,在国内外产生了重要影响。
Department of mechanical engineering covers 4 subdisciplines: mechanical manufacturing and automation, mechanical design and theory, mechatronic engineering, and vehicle engineering. There are 10 research institutes in the department, including Manufacturing Technology and Equipment Automation, Intelligent Manufacturing and Information Engineering, Robotics, Design and Control Engineering for Heavy Equipment, Biomedical Manufacturing and Life Quality Engineering, Mechatronics & Logistics Equipment, Mechatronics Design and Knowledge-based Engineering, Vibration, Shock & Noise, Manufacture for Thin-walled Structures, and Intelligent Vehicles. The main research laboratories in the department include the State Key Laboratory of Mechanical System and Vibration, the National Engineering Laboratory for Automotive Electronic Control Technology, the National Defense Key Discipline Laboratory of Vibration Shock & Noise, Shanghai Key Laboratory of Digital Manufacture for Thin-walled Structures, and Shanghai Key Laboratory of Networked Manufacturing and Enterprise Information.So far, there are 175 full-time faculty members, including 2 academicians, 5 Chief Scientists of National 973 Program, 3 National Distinguished Professors, 8 Cheung Kong Distinguished Professors, 7 Distinguished Young Scholars and 8 Outstanding Young Scholars.
本学科致力于培养具有“开阔的国际视野、强烈的创新意识、系统的知识结构、综合的实践能力、团队的合作精神、自信的沟通能力”的机械工程学科高层次科学技术研究及管理人才。一百多年来,服务国家创新发展战略和国家需求,培养了两弹一星功臣钱学森、全国人大副委员长严隽琪等一大批技术专家和治国英才,其中两院院士21人,大批培养学生在制造、动力、能源、航空航天等重点领域行业担任重要职务或技术骨干。
This department aims to cultivate outstanding talents in R&D as well as management in mechanical engineering, featured with "broad international vision, strong innovation consciousness, professional knowledge structure, comprehensive practical ability, team spirit and confident communication ability". In the past over 100 years, nearly 30,000 students have graduated from the department to serve the nation with innovation, research and development, including Tsien Hsue-shen, Yan Junqi, and 21 academicians. Many alumni have played important roles in key industries such as manufacturing, power, energy, and aerospace, etc.
二、培养目标 Program Objective
硕博连读生以培养博士生为最终目标,用最优化的时间、最优化的课程设计来培养出积极为国家服务、具有独立从事科学研究工作能力、能在科学或专门技术上做出创造性成果的人才。
学生毕业时应达到:
1、具有扎实的数理基础理论知识,深入的机械工程相关方向基础知识,熟悉学科的进展、动向和最新发展前沿;
2、掌握解决工程问题的现代研究方法与实验技术,具有应用理论和方法对相关专业方向工程科学及技术问题的理解和合理分析的能力;
3、具有较强的创新意识,具有在本学科某一方向取得理论或实践上取得创造性研究成果;
4、至少精通一门外国语,能熟练地阅读本专业外文资料,具有较强的写作能力和进行国际学术交流的能力。
5、具备较强的学术素养和工程实践能力,良好的职业道德和社会责任感。
With the ultimate goal of cultivating doctoral students, the program uses the optimized time and optimized curriculum to nurture innovative talents who can independently engage in scientific research.
Upon graduation, you will:
1. Have the firm mathematical foundation, in-depth fundamental knowledge in mechanical engineering and related areas, and be familiar with the progress, trends and latest development of the discipline;
2. Master the modern research methods and experimental techniques to solve engineering problems, and have the ability to apply theories and approaches to understand and reasonably analyze engineering science and technical issues in related professional directions;
3. Have a strong sense of innovation, and get creative achievements in theory or practice in a specific path of the discipline;
4. Show proficiency in at least one foreign language, read foreign language literature of your major fluently, and have good skills in writing and international academic communicating;
5. Have good academic accomplishment and engineering practice ability, professional ethics and social responsibility.
三、培养方式及学习年限 Training Mode and Study Duration
硕博连读生学习年限为6-8年。其中,硕士阶段为2年,博士阶段为4年,博士阶段可以延期到6年。是全日制方式培养。
硕博连读生的课程学习由硕士课程和博士课程两部分组成,硕士阶段的课程在第一年完成,博士阶段课程在成功转博后的第一年完成,总的课程学习时间不超过两年。
The length of full-time Combined Master and Doctoral Program (Master Level) is 4 years. Master level lasts 2 years while doctoral level lasts 4 years with a maximum length of 6 years.
Students should complete master level coursework in the first year and complete doctoral level coursework within thefirst year after transferring to doctoral level. The maximum length of coursework should last no longer than 2 years.
四、硕士阶段课程学习要求 Course Requirement
全日制硕博连读生(硕士阶段),课程总学分≥30学分,总学分上限为45学分。必须选择一门全英文课程。其中:选择GPA统计源的课程≥19学分,GPA≥2.7方可以进入博士阶段。
Full-time Combined Master and Doctor Degree Program (Master Level). Minimum credits: 30 credits, including at least 19 credits from GPA courses. One English-teaching course is required. Students whose GPA of the GPA courses is above 2.7 are eligible for doctoral study.
1.公共基础课程 12.5学分
General Courses. 12.5 credits.
a. MARX6001新时代中国特色社会主义理论与实践,2学分,必修
MARX6001 The Theory and Practice of Socialism in China, 2 credits, compulsory.
b. MARX6003自然辩证法概论,1学分,必修
MARX6003 Dialectic of Nature, 1 credit, compulsory.
c. FL6001学术英语,2学分,必修
FL6001 English for Academic Purposes, 2 credits, compulsory.
d. GE6001学术写作、规范与伦理,1学分,必修,院系开课
GE6001 Academic Writing, Norms and Ethics, 1 credit, compulsory, offered by ME.
e. GE6003 实验室安全教育,0.5学分,必修,院系开课
GE6003 Laboratory Safety Education,0.5 credit, compulsory, offered by ME school.
f. 数学课,6学分,必修
Mathematical courses, 6 credits, compulsory.
2.专业前沿课:GE6011 学术报告会,1学分,必修
Frontier Course.
GE6011, Academic Seminar, 1 credit, compulsory.
3.专业基础课、专业选修课:≥16.5学分
Core Courses and Elective Courses. Minimum credits: 16.5 credits.
4.统计如下:
Summarized as below.
课程类别 Course Type | 学分要求 Required Credits | 门数要求 Required Courses | GPA 学分要求 Min GPA | 备注 Note |
公共基础课 | 12.5 | 7 | 硕士阶段≥19学分,GPA≥2.7方可以进入博士阶段。 Requirement for Ph.D. level entrance: 19 credits taken at master level and GPA≥2.7 | |
专业基础课Core Courses、专业选修课Elective Courses | ≥16.5 | NA | 跨学科选课不超过2门,且仅作为非GPA统计源课程. No more than 2 interdisciplinary courses can be selected, which are counted as non-GPA course. | |
专业前沿课 | 1 | 1 |
博士课程学习计划参照对应的博士生培养方案制定,在转为博士生后正式取得博士学号、进入博士阶段后再选择。
五、过程管理培养过程要求 Training Requirement
培养过程中的主要时间节点如下:
(一)硕博连读生的硕士阶段
1、第一学年(第1、第2学期):以课程学习为主。硕博连读生入学后,通过三周的时间熟悉导师及研究方向等,之后完成意向导师的双选匹配。
2、第二学年(第3、第4期):准备和进行资格考试、正式确定导师。
学院每年组织二次博士生资格考试,大多数同学安排在秋季11月开始,少数同学和秋季考试不及格的同学可以选择在春季4月份参加资格考试。资格考试允许补考一次。
资格考试通过后,方能转入博士阶段培养。 学院将根据学校的要求组织已通过博士生资格考试(含一次通过和二次通过的)同学进行网上申报和博士资格确认(博士生入学复试)、确定导师。
3、硕博连读生转博和分流(第5学期初)
(1)通过资格考试、并通过博士生入学复试的同学正式进入博士培养阶段,转为博士生。
(2)二次博士生资格考试均未通过、经学院审核后转为按硕士生培养(开题、中期考核等过程质控参照学校对学术硕士的要求),转为硕士生的,学习年限为三年半,优秀者可申请提前毕业。
(3)不适合进行硕士学位学习和研究工作的,可选择退学。
(二)博士阶段(第5学期及以后)
正式取得博士学籍、进入博士阶段后将按博士生的相关规定培养。
The training process are summarized as follows:
Ⅰ Master level
1. The first academic year (1st and 2nd semester): Focusing on coursework. After enrollment, students learns about supervisors and their research background within three weeks, and then complete the double-way matching.
2. The second academic year (3rd and 4th semester): Preparing for and attending Ph.D. Qualification Examination and select supervisor .
Two Ph.D. Qualification Examination are held each academic year. Most students are scheduled to attend it in November. A few students and those who fail the first time can choose to take the it in next April.
Only those who pass the exam can transfer to doctoral level. According to the requirements of SJTU, ME school will organize students who have passed the Ph.D. Qualification Examination to apply for admission and select supervisor online.
3.Students transfer and diversion (at the beginning of the 5th semester)
(1) Students who pass the Ph.D. Qualification Examination and interview will formally enter into the doctoral level.
(2) Those who fail Ph.D. Qualification Examination two times will be transferred as master students after the school's review (training scheme refers to the school's requirements for academic master studnets). Outstanding students can apply for early graduation during the three and a half years study.
(3) Those who are not suitable for master study and research work can choose to quit the program.
Ⅱ Doctoral degree (since 5th semester)
After entering into doctoral level, students shall follow the requirements of the relevant regulations of doctoral students training.